2405-2870 04294676K High Quality Volvo Ec290b Excavator L60f Engine Turbocharger

• Customization: Available
• After-sales Service: 24 Hours Online Service
• Warranty: 24 Hours Online Service
• Model NO.: 2405-2870 04294676k
• Car Model: Volvo
• Engine Type: L60f
• Body Material: Steel
• Certification: ISO9001, CE
• Transport Package: Carton
• Specification: 15KG
• Trademark: Carruchi
• Origin: China
• HS Code: 8542310000
• Production Capacity: 500000PCS/Months

Product Description

2405-2870 04294676k High Quality Volvo Ec290b Excavator L60f Engine Turbocharger

Product Description

The turbocharger is an important component used to increase engine power and reduce exhaust gas emissions. Due to improper use,maintenance and care, prone to failure, resulting in the engine can not work properly. Some of the common failures of turbochargers and their handling methods are described below.
Oil leakage
Phenomenon one: oil consumption is large, but the exhaust smoke colour is normal, the power is not reduced.
Cause: This situation is generally caused by oil leakage.
Treatment methods.
1. first of all, you should check the engine lubrication system external oil pipe (including supercharger into, return oil pipe) whether oil leakage.
2. Check whether there is oil in the exhaust gas outlet of the supercharger. If there is oil, it can be judged that the seal ring at one end of the turbo is damaged, and this seal ring should be replaced.
Phenomenon two: oil consumption is large, blue smoke from exhaust, but the power does not drop.
Reason: Due to the supercharger end of the oil leakage, oil through the engine intake pipe into the combustion chamber was burned off, there are several possibilities:

1. The oil return pipe of the supercharger is not smooth, and the oil accumulates too much at the middle support of the rotor assembly, and flows into the pressure impeller along the rotor shaft.
2. near the pressure impeller end of the seal ring or oil ring damage, the oil thus entered the impeller chamber, and then with the indoor pressurized air into the combustion chamber through the tube.
Treatment methods.
1. Open the air outlet of the compressor or the engine air inlet straight pipe (rubber hose) to see if oil is adhering to the mouth and wall of the pipe. If so, please check whether the oil return pipe of the supercharger is clear. If it is not clear, it is caused by excessive oil accumulation at the middle support.
2. If it is clear, it is caused by damage to the sealing ring or oil dump ring at one end of the impeller, and the supercharger should be disassembled for repair.
Phenomenon three: oil consumption is large, exhaust blue smoke or black smoke, and power down.
Causes.
1. the gap between the piston and cylinder wear too large, the oil fled into the combustion chamber and was burned off.
2. In the process of air being sucked in by the supercharger, the air flow encounters greater resistance. (such as air filter blockage, air intake hose is sucked deformed or flattened, etc.), the pressure at the intake port of the compressor is low, resulting in oil leakage into the compressor, with the compressed air into the combustion chamber burned off.
Treatment methods.
1. check whether there is oil in the wall of the inlet straight soft tube, whether it is flattened, so that the airflow is blocked or the air filter element is blocked.
2. If there is oil in the pipe mouth and pipe wall, the air filter element should be cleaned or replaced.
Metal friction sound
Phenomenon: black smoke from the exhaust, power drop, and a strange sound from the supercharger.
Cause.
1. such as metal friction sound, is the supercharger rotor bearing or thrust bearing wear too much, impeller and supercharger shell friction and produce.
2, such as metal friction, but the sound of airflow, is due to the high-speed rotation of the supercharger rotor, resulting in the sound of rotation, or into the exhaust interface due to poor connection of the air leakage phenomenon.
Treatment methods.
(1) the former should be repaired by replacing damaged spare parts depending on the wear and tear situation.
(2) The latter should be carefully distinguished, targeted solutions.
Bearing damage
Phenomenon: supercharger bearing damage, engine power down, high oil consumption, black smoke, serious when the supercharger can not work.
Causes.
1. insufficient lubricating oil pressure and flow.
a. Insufficient supply of lubricating oil to the supercharger journal and thrust bearing.
b. Insufficient lubricating oil to keep the rotor journals and bearings floating between them.
c. The supercharger is already running at high speed and the lubricating oil is not supplied in time.
2. debris or sediment has entered the lubrication system.
3. The oil has oxidised and deteriorated.
a. The diesel oil is overheated and too much gas is running through from between the piston and the cylinder wall.
b. Cooling water leaking into the oil.
c. Improper choice of oil, as well as not changing the oil regularly according to the regulations.
Treatment methods.
1. Check whether the lubricating oil pressure is normal and whether the amount of oil meets the requirements.
2. Replace the oil regularly and ensure that it is clean according to the requirements.
3. Use lubricants strictly in accordance with the requirements and do not mix them.
4. Avoid working with the engine at high temperatures and maintain the normal working temperature of the engine.

Detailed Photos

Certifications

The company 'goods are of good quality and exquieite packaging ,which have passed the audit of many chinese qualification inspection institutions and obtained many certificates,so it 's very popular in every countries.

Packaging & Shipping

1. Our packing uses export wooden cases, plastic boxes, cartons or pallets. All the package are very strong, the wooden box is firmly bound, the package is covered with a waterproof film to prevent water or damage during transportation.Before packing, we can also stick corresponding labels and shipping marks according to your needs. All our goods are well packed.
2. According to the quantity, we can use express delivery, air transportation or ocean transportation, automobile transportation, railway transportation, etc. we have our own freight forwarders, and we can also use the designated freight forwarders of customers, which can meet various delivery requirements of customers, such as EXW, FOB, CIF, etc.It can also be exported from many ports in China. Such as Qingdao port, Ningbo port, Lianyungang port, Tianjin port, Suifenhe River and Alashankou in China.
3. We can also send the goods by express if the customers have less goods. According to customer's request, we can use express.such as DHL, TNT, EMS, FedEx, etc. the delivery time is 3-7. Safe, fast and convenient. It's also a good choice for you.

Company Profile

Jinan Carman International Trade Co., Ltd. was established in 2013. Its main business is the export of truck parts to the Russian,Europe and Southeast Asia market.like shacman ,sinoturk ,faw weichai cummins ZF ,cummins XCMG LGMG JCB .DCEC,isuzu caterpiller .komatsu yanmar spare parts .The company has its own warehouse in Jinan with an area of 2000 square meters.and have a large stock .And Ability to quickly collect and deliver goods.Our main business is SINOTRUK, shacman , FAW, Cummins and all kinds of construction machinery accessories. We always adhere to the quality of products as the core, to serve customers as the task.Hope to be able to better communicate with friends from all over the world, and through this communication, promote the development of cultural exchanges and economic exchanges between the two sides.

FAQ

Q1:How can get exact price,Can I get a price discount?
A1: If you can supply correct part number,it's the best way to get exact price,The price depends on your purchasing quantity, more quantity more discount.

Q2:Can we get samples for testing?
A2:We can provide you with free samples,you only need to bear the freight.If your first purchase quantity meets our requirements,we can apply for you more favorable price.
 

Q3:How long is the production item of the goods?
A3:Our warehouse has sufficient regular sizes stocking,ready to delivery.And we have a lot of raw materials storage,customer specifications can be arranged in a timely production,delivery can be made within 7-10 days.
 

Q4. What is your terms of payment?
A4: T/T 30% as deposit, and 70% before delivery. We'll show the photos of the products and packages before delivery.
 

Q5. What is your terms of delivery?
A5: EXW, FCA, FOB, CFR, CIF, DDU.
 

Q6. How about your delivery time?
A6: Generally, it will take 15 to 30 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
 

Q7.If we don't find what we need on your website, what should we do? A7: You can send us the OE number or of the product you need, we will check if we have them.

 

Q8. Which useful documents you can supply?
A8:We can supply certificate of origin ,certificated of quality invoice issued by China Chamber of international commerce and inspection report.
 

Q9. About product quality guarantee and after-sales service
A9:our products have 6 months quality guarantee ,we also provide strict testing before shipment and follow up the customer's feedback remote online service.